Cracking and drying are two most common problems seen with gaskets. These problems occur when the seal becomes brittle or dries out, and the material develops fissures, even if that means being the size of a hairline. Slowly and gradually, these cracks spread further, thus rendering the gasket unreliable with fluid leakage. So, you must always be on the lookout for such problems and repair them right away. In fact, we know that prevention is better than cure. This is why we have brought to you a list of measures that you can take to prevent any kind of cracking or drying that can harm your gasket, in the first place.

Use gaskets that can handle extreme temperatures

Gaskets, when exposed to hot fluids, start getting brittle. This is because high temperature results in shrinking of the gasket. This is why in spite of their pliable nature, the gasket seals start cracking. This is why you must opt for gaskets that are made of materials that are rated to deal with such extreme temperatures. Get in touch with Trim Engineering Services, one of the leading spiral wound gasket manufacturers in India, who builds gaskets using A-grade materials, keeping all kinds of dangers and possibilities in mind.

Keep gaskets away from outdoor threats

Gaskets that are exposed to UV light for a long time start aging earlier than expected. Also, when left exposed to ozone, the gasket seals begin to crack. Therefore, it is best to keep gaskets away from sunlight, ozone, and such outdoor threats. Store them indoors in a dark space. Even better, you must opt for gaskets that are designed to handle such environmental conditions effectively. Here again, Trim Engineering Services’ gaskets can help.

Prevent gaskets from vibration and noise

Another challenge faced by gaskets is the amount of vibrations they undergo. To prevent the adverse effects of vibration on gaskets, it is important that you use a gasket adhesive that incorporates a pliable material base. You can also opt for a series of vibration-isolating hoses to prevent mechanical noise propagation.

Don’t leave gaskets ununsed for long

When gaskets are unused for a long time, they tend to dry out because of no water or fluid passage. For example, if a house is kept unused for a long time with no residents living in it, meaning that all the taps are also left unused, the gaskets in the taps can dry out. On the other hand, if the taps are run frequently, the seals are kept wet, which prevents the gaskets from drying.

So, we can see how gaskets can dry and crack because of a variety of reasons like high temperatures, vibration, excessive noise propagation, UV light, ozone, and not being used for long. And now, we also have the various preventive measures for each case. So, make sure you employ the above mentioned tips to avoid your gaskets from becoming hard, brittle, cracked, and dry.